Omkar Enterprise
Omkar Enterprise
Padavala, Rajkot, Gujarat
GST No. 24AADFO5764A1ZK
TrustSEAL Verified
Call 0804801759790% Response Rate
SEND EMAIL

C Frame Hydraulic Power Press Machine

Our product range includes a wide range of omkar make c frame hydraulic power press machine (chpp-5), omkar make c frame hydraulic power press machine (chpp-10), omkar make c frame hydraulic power press machine (chpp-20), c frame hydraulic power press machine (chpp-10), c type hydraulic power press and 10 ton c type hydraulic press.

Omkar Make C Frame Hydraulic Power Press Machine (CHPP-5)

Omkar Make C Frame Hydraulic Power Press Machine (CHPP-5)
  • Omkar Make C Frame Hydraulic Power Press Machine (CHPP-5)
Get Best Quote
Approx. Price: Rs 75,000 / PieceGet Latest Price

Product Details:

Capacity05 Ton
Machine TypeC Type
Power SourceHydraulic
Type Of PressC Frame Hydraulic Power Press Machine.
Stroke60 MM
BrandOmkar
Table Size305 x 178 MM
Motor Power1.5 HP
Bed Hole Diameter63 MM
Phase3 Phase
Usage/ApplicationIndustrial
I Deal InNew Only
Country of OriginMade in India

 

C - Frame Hydraulic Power Press Machine.


Frame Construction:
 Frame Is Fabricated From IS-2062 Graded Rolled Steel Plates Table and Cutting Beam Is Deeply Reinforced and Fines Machines after Stress Reliving. The Interlocked Design Put The Direct Support To Frame. This Frame Is Strain Free And Eliminates Welds At Load Supports. Thus The Accuracy Of The Machine Is Never Disturbed.


Table & Slide (Ram):
 Table And Slide Are Made Of High Grade Heavy Duty Cast Iron / Steel Fabricated And Properly Seasoned. They Are Perfectly Aligned, To Each Other To Obtain High Accuracy And Precession Press Operation.


Cylinder:
 The Cylinder Bodies Are Precisely Made From Forged Steel Material Duly Bored And Fine Honed For Long Sealing Life. The Piston Rods Are Made From EN – 8 Material Having Low Carbon Contents. The Piston Rod Is Hard Chrome Platted (100 Micron).


Hydraulic System:
 The Compact Blocks Eliminate The Leakage Chances And Also Reduces The Hydraulic Pipes. This Low Noise Hydraulic System Is Placed On the Rear Side of Machine, On Top between Two Side Plates. Pressure Relief Value Is Provided To Safe Guard The System And Machine From Overload. The Hydraulic System Is Driven By An Electric Motor Of Reputed Brand And Is Coupled With A Pump Capable Of Generating More Than The Required Pressure. Pressure Gauge For System Pressure, Back Pressure And Holding Pressure Are Providing On Top Of Oil Tank For Quick Reference.


Electrical Control Panel:
 The Electric Control Panel Is Located On The Left Hand Side Of The Machine. It Is Assembled From The Internationally Reputed Parts For Consistent Performance, Reliability And Availability, If Needed To Be Replaced. It Is Wired Cleanly And Labeled/Ferruled Properly As Per The International Practices To Help Easily Locate Any Fault And Replace Components Conveniently.

 

Request
Callback


Additional Information:

  • Production Capacity: 15 to 17 Machine Per Month
  • Delivery Time: 3 to 5 Weeks
  • Packaging Details: Wooden Crate Box & Plastic Wrapping
Yes! I am Interested

Omkar Make C Frame Hydraulic Power Press Machine (CHPP-10)

Omkar Make C Frame Hydraulic Power Press Machine (CHPP-10)
  • Omkar Make C Frame Hydraulic Power Press Machine (CHPP-10)
Get Best Quote
Approx. Price: Rs 1.1 Lakh / PieceGet Latest Price

Product Details:

Usage/ApplicationIndustrial
Type Of PressC Frame Hydraulic Power Press Machine
Capacity10 Ton
Power SourceHydraulic
BrandOmkar
TypeC Type
Stroke70 MM
Motor Power2 HP
Bed Hole Diameter76 MM
Phase3 Phase
I Deal InNew Only
Country of OriginMade in India
Distance RAM to BED204 MM
Table Size406 x 254 MM
Motor2 HP

C - Frame Hydraulic Power Press Machine.


Frame Construction:
 Frame Is Fabricated From IS-2062 Graded Rolled Steel Plates Table and Cutting Beam Is Deeply Reinforced and Fines Machines after Stress Reliving. The Interlocked Design Put The Direct Support To Frame. This Frame Is Strain Free And Eliminates Welds At Load Supports. Thus The Accuracy Of The Machine Is Never Disturbed.


Table & Slide (Ram):
 Table And Slide Are Made Of High Grade Heavy Duty Cast Iron / Steel Fabricated And Properly Seasoned. They Are Perfectly Aligned, To Each Other To Obtain High Accuracy And Precession Press Operation.


Cylinder:
 The Cylinder Bodies Are Precisely Made From Forged Steel Material Duly Bored And Fine Honed For Long Sealing Life. The Piston Rods Are Made From EN – 8 Material Having Low Carbon Contents. The Piston Rod Is Hard Chrome Platted (100 Micron).


Hydraulic System:
 The Compact Blocks Eliminate The Leakage Chances And Also Reduces The Hydraulic Pipes. This Low Noise Hydraulic System Is Placed On the Rear Side of Machine, On Top between Two Side Plates. Pressure Relief Value Is Provided To Safe Guard The System And Machine From Overload. The Hydraulic System Is Driven By An Electric Motor Of Reputed Brand And Is Coupled With A Pump Capable Of Generating More Than The Required Pressure. Pressure Gauge For System Pressure, Back Pressure And Holding Pressure Are Providing On Top Of Oil Tank For Quick Reference.


Electrical Control Panel:
 The Electric Control Panel Is Located On The Left Hand Side Of The Machine. It Is Assembled From The Internationally Reputed Parts For Consistent Performance, Reliability And Availability, If Needed To Be Replaced. It Is Wired Cleanly And Labeled/Ferruled Properly As Per The International Practices To Help Easily Locate Any Fault And Replace Components Conveniently.

Request
Callback


Additional Information:

  • Production Capacity: 8 to 10 Machine Per Month
  • Delivery Time: 3 to 5 Weeks
  • Packaging Details: Wooden Crate Box & Plastic Wrapping
Yes! I am Interested

Omkar Make C Frame Hydraulic Power Press Machine (CHPP-20)

Omkar Make C Frame Hydraulic Power Press Machine (CHPP-20)
  • Omkar Make C Frame Hydraulic Power Press Machine (CHPP-20)
Get Best Quote
Approx. Price: Rs 2 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

BrandOmkar
Usage/ApplicationIndustrial
Type Of PressC Frame Hydraulic Power Press Machine.
ColorBlue, Green & Gray
Control TypeC Frame Hydraulic Power Press Machine.
Frame TypeC Frame
Stroke80 MM
Table Size508 x 305 MM
Motor Power3 HP
Bed Hole Diameter83 MM
Phase3 Phase
I Deal InNew Only
Country of OriginMade in India

C - Frame Hydraulic Power Press Machine.


Frame Construction:
 Frame Is Fabricated From IS-2062 Graded Rolled Steel Plates Table and Cutting Beam Is Deeply Reinforced and Fines Machines after Stress Reliving. The Interlocked Design Put The Direct Support To Frame. This Frame Is Strain Free And Eliminates Welds At Load Supports. Thus The Accuracy Of The Machine Is Never Disturbed.


Table & Slide (Ram):
 Table And Slide Are Made Of High Grade Heavy Duty Cast Iron / Steel Fabricated And Properly Seasoned. They Are Perfectly Aligned, To Each Other To Obtain High Accuracy And Precession Press Operation.


Cylinder:
 The Cylinder Bodies Are Precisely Made From Forged Steel Material Duly Bored And Fine Honed For Long Sealing Life. The Piston Rods Are Made From EN – 8 Material Having Low Carbon Contents. The Piston Rod Is Hard Chrome Platted (100 Micron).


Hydraulic System:
 The Compact Blocks Eliminate The Leakage Chances And Also Reduces The Hydraulic Pipes. This Low Noise Hydraulic System Is Placed On the Rear Side of Machine, On Top between Two Side Plates. Pressure Relief Value Is Provided To Safe Guard The System And Machine From Overload. The Hydraulic System Is Driven By An Electric Motor Of Reputed Brand And Is Coupled With A Pump Capable Of Generating More Than The Required Pressure. Pressure Gauge For System Pressure, Back Pressure And Holding Pressure Are Providing On Top Of Oil Tank For Quick Reference.


Electrical Control Panel:
 The Electric Control Panel Is Located On The Left Hand Side Of The Machine. It Is Assembled From The Internationally Reputed Parts For Consistent Performance, Reliability And Availability, If Needed To Be Replaced. It Is Wired Cleanly And Labeled/Ferruled Properly As Per The International Practices To Help Easily Locate Any Fault And Replace Components Conveniently.

Request
Callback


Additional Information:

  • Production Capacity: 8 to 10 Machine Per Month
  • Delivery Time: 3 to 5 Weeks
  • Packaging Details: Wooden Crate Box & Plastic Wrapping
Yes! I am Interested

C Frame Hydraulic Power Press Machine (CHPP-10)

C Frame Hydraulic Power Press Machine (CHPP-10)
  • C Frame Hydraulic Power Press Machine (CHPP-10)
Get Best Quote
Approx. Price: Rs 1.1 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Capacity10 Ton
Type Of PressC Frame Hydraulic Power Press Machine.
Stroke70 MM
Table Size406 x 254 MM
Motor Power2 HP
Bed Size406 x 254 MM
Phase3 Phase
Usage/ApplicationIndustrial
I Deal InNew Only
BrandOmkar
Country of OriginMade in India

C - Frame Hydraulic Power Press Machine.


Frame Construction:
 Frame Is Fabricated From IS-2062 Graded Rolled Steel Plates Table and Cutting Beam Is Deeply Reinforced and Fines Machines after Stress Reliving. The Interlocked Design Put The Direct Support To Frame. This Frame Is Strain Free And Eliminates Welds At Load Supports. Thus The Accuracy Of The Machine Is Never Disturbed.


Table & Slide (Ram):
 Table And Slide Are Made Of High Grade Heavy Duty Cast Iron / Steel Fabricated And Properly Seasoned. They Are Perfectly Aligned, To Each Other To Obtain High Accuracy And Precession Press Operation.


Cylinder:
 The Cylinder Bodies Are Precisely Made From Forged Steel Material Duly Bored And Fine Honed For Long Sealing Life. The Piston Rods Are Made From EN – 8 Material Having Low Carbon Contents. The Piston Rod Is Hard Chrome Platted (100 Micron).


Hydraulic System:
 The Compact Blocks Eliminate The Leakage Chances And Also Reduces The Hydraulic Pipes. This Low Noise Hydraulic System Is Placed On the Rear Side of Machine, On Top between Two Side Plates. Pressure Relief Value Is Provided To Safe Guard The System And Machine From Overload. The Hydraulic System Is Driven By An Electric Motor Of Reputed Brand And Is Coupled With A Pump Capable Of Generating More Than The Required Pressure. Pressure Gauge For System Pressure, Back Pressure And Holding Pressure Are Providing On Top Of Oil Tank For Quick Reference.


Electrical Control Panel:
 The Electric Control Panel Is Located On The Left Hand Side Of The Machine. It Is Assembled From The Internationally Reputed Parts For Consistent Performance, Reliability And Availability, If Needed To Be Replaced. It Is Wired Cleanly And Labeled/Ferruled Properly As Per The International Practices To Help Easily Locate Any Fault And Replace Components Conveniently.

Request
Callback


Additional Information:

  • Production Capacity: 8 to 10 Machine Per Month
  • Delivery Time: 5 to 7 Weeks
  • Packaging Details: Wooden Crate Box & Plastic Wrapping
Yes! I am Interested

C Type Hydraulic Power Press

C Type Hydraulic Power Press
  • C Type Hydraulic Power Press
Get Best Quote
Approx. Price: Rs 3.6 Lakh / UnitGet Latest Price

Product Details:

Capacity5-100 Ton
CNC or NotCNC
Power SourceHydraulic
FinishingPaint Coated
Phase1 Phase
BrandOmkar
Warranty1 Year
Frequency50 Hz
TypeC Type
Voltage220 V
MaterialMild Steel
Stroke Per Min30 Per Min
Adjustment25 - 100 mm

With rich industrial experience we are involved in offering an extensive range of C Type Hydraulic Power Press.
Request
Callback
Yes! I am Interested

10 Ton C Type Hydraulic Press

10 Ton  C Type Hydraulic Press
  • 10 Ton  C Type Hydraulic Press
Get Best Quote
Approx. Price: Rs 1.25 Lakh / UnitGet Latest Price

Product Details:

Usage/ApplicationManual
Capacity10 Ton
CategoriesPress
MaterialMild Steel
Max Force Or Load0-30 ton
Power SourceHydraulic
CNC or NotCNC
Automation GradeAutomatic
Automatic Typeautomatic
Colorblue
Frequency50 Hz
Voltage220 V
Stroke75 Per min
Table Size406 x 254 mm
BrandOmkar
I Deal InNew Only
Machine TypeC Type

c type hydraulic press, panel operated hydraulic press, punching machine, 10 ton capacity, embojing machine 
Request
Callback
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Product

View All Product


Reach Us
Balvant Hirpara (Partner)
Omkar Enterprise
Maruti Industrial Estate, R S R No. 65/1 P 2, Plot No. 21, Lothada
Padavala, Rajkot - 360024, Gujarat, India


Call Us


Send E-mail