Hydraulic Shearing Machine

Product Details:

3125 x 4 MM Hydraulic Shearing Machine (OHSM-430)

FRAME CONSTRUCTION: All "Omkar" Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 6 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

2540 x 3 MM Hydraulic Shearing Machine (OHSM-325)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 10 to 12 Machines Per Month
• Delivery Time: 5 to 6 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

4000 x 4 MM Hydraulic Shearing Machine (OHSM-440)

FRAME CONSTRUCTION: All "Omkar" Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 6 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

6000 x 4 MM Hydraulic Shearing Machine (OHSM-460)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

2030 x 6 MM Hydraulic Shearing Machine (OHSM-620)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

1525 x 6 MM Hydraulic Shearing Machine (OHSM-615)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

2030 x 4 MM Hydraulic Shearing Machine (OHSM-420)

FRAME CONSTRUCTION: All "Omkar" Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 6 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

3125 x 3 MM Hydraulic Shearing Machine (OHSM-330)

FRAME CONSTRUCTION: All "Omkar" Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 6 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

1525 x 3 MM Hydraulic Shearing Machine (OHSM-315)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 10 to 12 Machine Per Month
• Delivery Time: 5 to 6 Weekss
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

5000 x 4 MM Hydraulic Shearing Machine (OHSM-450)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

3125 x 6 MM Hydraulic Shearing Machine (OHSM-630)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

4000 x 6 MM Hydraulic Shearing Machine (OHSM-640)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

5000 x 6 MM Hydraulic Shearing Machine (OHSM-650)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

6000 x 6 MM Hydraulic Shearing Machine (OHSM-660)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

2030 x 8 MM Hydraulic Shearing Machine (OHSM-820)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

3125 x 8 MM Hydraulic Shearing Machine (OHSM-830)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

4000 x 8 MM Hydraulic Shearing Machine (OHSM-840)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

2540 x 6 MM Hydraulic Shearing Machine (OHSM-625)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

2540 x 4 MM Hydraulic Shearing Machine (OHSM-425)

FRAME CONSTRUCTION: All "Omkar" Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 6 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

1525 x 4 MM Hydraulic Shearing Machine (OHSM-415)

FRAME CONSTRUCTION: All "Omkar" Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 6 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

2030 x 3 MM Hydraulic Shearing Machine (OHSM-320)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

1525 x 8 MM Hydraulic Shearing Machine (OHSM-815)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping

Product Details:

2540 x 8 MM Hydraulic Shearing Machine (OHSM-825)

Omkar Variable Rake Angle Type Hydraulic Shearing Machine. Have Been Designed & Developed Through Structural Analysis Technique For Continuous Production, Accuracy And Repeatability.

Frame: Rigid Steel Frame Of Omkar Shears Are Optimally Designed To Avoid Weak Sections At Load Supports And Are Of Interlocked Design. The Ram Is Guided Throughout Its Length by Accurate Machined Guide Ways Ensuring Proper Clearance and Clean Cut.

Hold - Down System: Spring Loaded Mechanical Hold Down Pads Hold The Sheet Securely, To Avoid Slipping And Bowing Resulting In Clean Square Cuts. Hold down Units Are Provided with Oversize Pads to Avoid Impressions on Sheet Metal on Request.

Blades: Omkar Shears Are Provided With High Quality Single Segment (HCHCR) Blades for Longer Tool Life. Ease In Assembling Of Knife Reduces Down - Time. The Shear Blades Are Four Edged.

Lubrication: All Bearing Parts and Guide Surfaces Are Lubricated Through Hand-Operated Lubrication System.

Mechanical Back Gauge: This Is Standard Equipment Provided On All Omkar Shears. Scale On The Back Gauge Gives Instantaneous Reading Of Distance Between Shear And Back Gauge. Thus Avoiding Errors and Maintenance Encountered In Electronic Equipment.

Finger Guard: Fitted In Front Of Hold down For Operator Protection without Obstructing Viewing.

Additional Information:

• Production Capacity: 5 to 7 Machines Per Month
• Delivery Time: 5 to 7 Weeks
• Packaging Details: Wooden Crate Box & Plastic Wrapping